Reasons That Your AC Is Not Cooling Properly

Here are some of the most common reasons for AC not cooling: Blocked up air filter: If the AC doesn't cool, the air filter is likely obstructed. In such case, air can't course through as expected which incredibly lessens the cooling limit of the AC.

If the air filter of your AC is dust covered, clean it with a delicate brush under running water.

Dusty coils: If the AC is not cooling then condenser coils might be dirty and dust covered. In an AC unit, the condenser works like a radiator that disseminates heat (which was eliminated from the air). The coil should be able to work effectively to disperse heat outside. As the coils get dirtier the AC turns out to be less proficient, which makes it work harder to cool the room. Assuming the coils are adequately dirty, the unit won't ever be sufficiently cold and cannot cool the room Air Conditioning Repair Brisbane .

Deficient coolant: Lack of coolant is the most common reason for AC not cooling. The coolant circles through the evaporator coils and cools the air over it and it slowly sends cool air into the room. So when the level of this coolant becomes deficient, the AC stops sending the cool air.

Broken blower: A blower is the core of a cooling unit which is liable for cooling your room. If your AC doesn't cool, the blower has gone defective. The blower is an engine which packs the refrigerant or coolant and circles the refrigerant through the evaporator and condenser coils. If the blower turns defective the cooling cycle doesn't begin and the AC stops cooling.

If you suspect that your AC is not working due to any of these given reasons, call for Air Conditioning Repair in Brisbane.